Scalloped Crib Rail Covers: A Step-by-Step Sewing Pattern for a Perfect Fit
Introduction
Scalloped crib rail covers add a touch of charm and protection to your baby's sleeping space. With this step-by-step sewing pattern, you can create a custom cover that perfectly fits your crib and keeps your little one safe and comfortable.
Materials You'll Need:
- Fabric of your choice (at least 1/2 yard)
- Matching thread
- Measuring tape or ruler
- Fabric scissors
- Sewing machine
- Iron and ironing board
Step 1: Measure and Cut Fabric
Measure the length and height of your crib rails and add 2 inches to each measurement for seam allowances. Cut two pieces of fabric according to these measurements.
Step 2: Fold and Mark Scallops
Fold the top edge of one fabric piece down by 1 inch and press. Fold down another 1 inch and press again to create a double-fold hem. Mark scallops along the folded edge, spacing them evenly about 3 inches apart.
Step 3: Sew Scallops
Sew a line of straight stitches along the marked scallops, about 1/4 inch from the folded edge. Trim any excess fabric close to the stitching.
Step 4: Attach Hem to Crib Rail
Place the fabric piece with the scallops over the crib rail, aligning the folded edge with the top of the rail. Pin in place and sew a line of stitches along the folded edge, using a blind hem stitch or a regular stitch with very small stitches.
Step 5: Create Ties
Cut two strips of fabric, each measuring 12 inches long by 2 inches wide. Fold each strip in half lengthwise and press. Sew the raw edges together to create two ties.
Step 6: Attach Ties
Fold the bottom raw edge of the other fabric piece up by 1 inch and press. Fold up another 1 inch and press again. Sew the ties to the inside of the folded edge, spacing them evenly. The ties should be facing out.
Step 7: Finish Hem and Attach
Sew a line of stitches along the folded edge to finish the hem. Place the fabric piece with the ties over the crib rail, aligning the folded edge with the bottom of the rail. Pin in place and sew a line of stitches along the folded edge.
Conclusion
With this step-by-step sewing pattern, you can easily create a beautiful and functional scalloped crib rail cover. By following these instructions carefully, you'll end up with a custom cover that will keep your baby safe and add a touch of charm to your nursery.
Comments